-
Code
212888
-
Remarks(dimensions)
300L
-
Accessories Shelf support
8 pcs.
-
Accessories Shelf
4 pcs.
-
Shelf support pitch
60mm
-
Shelf support step number
15 steps
-
Withstand load of shelf
15 kg / pc.
-
Internal dimensions(W×D×H mm)
600×500×1000mm
-
Safety unit.
Program lock, Overheat preventive device, Over current electric leakage breaker, Door switch, Temperature fuse, External alarm terminal
-
Safety unit
Self diagnostic function (Temperature sensor error, Heater disconnection, SSR short-circuit, Automatic overheat prevention function), Key lock,
-
Sensor
K-thermocouple (for temp. adjustment, Indivisual overheating prevesion)
-
Heater control
SSR control
-
Exhaust port
Upper part of rear of the main body: φ80 (Open / Close with a manual damper)
-
Damper control
Linked air supply / Exhaust with manual knob on the front of the main body
-
Air supply port
Bottom of heater room (Open/Close with a manual damper)
-
Door packing
Silicon rubber
-
Cable port
I.D.: 30mm One at the right side of the main body
-
Fan motor
Condenser type motor × 2pcs
-
Blower fan
Sirocco fan×2
-
Heater capacity
200 to 220V 3.6 to 4.36kW
-
Heater and heat insulator
SUS pipe heater & glass wool
-
Interior/exterior
Stainless steel plate/chrome free electro galvanized steel plate Chemical proof baking finish
-
Air supply/exhaust damper
Front operation/manual damper Air supply pipe/exhaust pipe at the rear NSSC180 With exhaust duct
-
Temp. decrease time
About 40min. from 260°C ->50°C
-
Time to attain max. temp.
Within 50min. from 25°C ->260°C
-
Temperature distribution accuracy
±2℃(at 200℃)、±2.5℃(at 260℃)
-
Temperature adjustment accuracy
±0.5℃
-
Operating temperature range
Room temp. +30°C to 260°C
-
Method
Forced convection
-
Weight
155kg
-
Power Source
AC200 to 220V 18.5-20.5A Single-phase
-
External dimensions(W×D×H mm)
770×696×1674mm
-
Operating atmospheric temp. range (deg.C)
23 deg.C+/-5 deg.C, 65%RH+/-20% (no load)